Pile-driving arm manufacturers: The price of a hydraulic vibratory hammer is inseparable from its maintenance!
- Categories:Industry News
- Author:
- Origin:http://www.zh-sanmi.com
- Time of issue:2020-10-30
- Views:0
(Summary description)What is a hydraulic vibratory hammer for you from the pile-driving arm manufacturer?
Pile-driving arm manufacturers: The price of a hydraulic vibratory hammer is inseparable from its maintenance!
(Summary description)What is a hydraulic vibratory hammer for you from the pile-driving arm manufacturer?
- Categories:Industry News
- Author:
- Origin:http://www.zh-sanmi.com
- Time of issue:2020-10-30
- Views:0
What is a hydraulic vibratory hammer for you from the pile-driving arm manufacturer?
It is actually an excavator hydraulic pump providing hydraulic power to drive a hydraulic motor, which is used for high-speed operation to drive an eccentric gear set to generate high-frequency vibration power, and the inner and outer shells are covered with shock-absorbing rubber to reduce vibration. The transfer causes the size of the hanger and the excavator to be damaged, and at the same time it produces downward vibration. The inner shell component is directly connected to the chuck component, so the vibration force generated by the inner shell component can be directly transmitted to the workpiece. The high-frequency vibration power generated by the cabinet allows high-frequency vibration around the soil around the workpiece, thereby performing stacking and pulling the column. The vibrating pile sinking hammer uses its high-frequency vibration to vibrate the pile at a high speed, and transmits the vertical vibration of the machine to the pile, which causes the soil structure around the pile to change and the strength is reduced. When you want to buy, you have to see the price of the hydraulic vibratory hammer, and you can't blindly try to be cheap and ignore the quality.
The excitation force required by the pile-driving engineering machinery of the pile-driving arm manufacturer should be comprehensively analyzed and determined according to the different soil layers, soil quality, water content of the teaching site, and the type and structure of the pile. The efficiency of vibratory pile driving is higher than other construction methods, and it can be mainly applied to traditional steel sheet piles, steel pipe piles and prefabricated piles of slender concrete buildings with a length of less than 8m. This kind of pile driving method is most suitable for working in sandy soil, and the effect is relatively poor in clay. It must be selected with a larger power model.
The price of hydraulic vibrating hammer and the maintenance of vibrating hammer:
It takes about 10 hours to change the gear oil for the first time, and every 100 hours to change the gear oil for the second time. If the weather is hot, you can choose the appropriate time to change the gear oil 90 hours in advance. The situation is relatively cold, it can be appropriately and effectively extended to 130 hours to replace it.
The gear oil concentration of the pile driving arm manufacturer should not be too thick, and the concentration should be as low as possible, and it is best to mix it with oil.
Scan the QR code to read on your phone
Relevant news


Steel sheet pile machine manufacturers: What are the misunderstandings of pile driver maintenance?

Steel sheet pile machine manufacturers: introduction to the piling steps and electricity issues of the pile driver

Steel sheet pile machine manufacturers: Which operations of the pile driver are incorrect?
Online Message