Pile-driving arm manufacturers: Steel sheet piles commonly used in steel sheet pile machines currently mainly include steel pipe piles and H-shaped steel piles. The above-ground soil in coastal and inland alluvial plain areas is generally thick (up to 50-60m) of soft soil. When the superstructure load is large, this type of foundation cannot be directly used as a supporting layer. The low compression of these areas The bearing layer is very deep. When using ordinary pile foundations, pile hammers with great impact force must be used when driving piles. In this case, conventional reinforced concrete piles and prestressed concrete piles are difficult to adapt. Therefore, people mostly choose Steel pipe piles strengthen the foundation. Steel pipe piles have been widely used at home and abroad.

Pile-driving arm manufacturers: the advantages of the steel sheet pile machine are as follows

(1) Light weight, good rigidity, convenient loading, unloading, transportation, and stacking, and not easy to damage.

(2) High carrying capacity. The steel has high strength, can be driven into hard soil effectively, the pile body is not easy to be damaged, and can obtain a large single pile bearing capacity.

(3) The pile length is easy to adjust. Steel pipe piles can be lengthened or cut to adjust the pile length as needed.

(4) The amount of soil discharged by the steel sheet pile machine is small, and the impact on neighboring buildings (structures) is small. Since the lower end of the pile is open, as the pile is driven, the amount of soil squeezed into the pile pipe is greatly reduced compared with the actual pile. The influence of the top level displacement can also be greatly reduced.

(5) The joint connection is simple. It can be welded by electric welding, which is easy to operate, high in strength and safe to use.

(6) The engineering quality of the steel sheet pile machine is reliable and the construction speed is fast.

Pile-driving arm manufacturers: The above is all about the advantages of the steel sheet pile machine. If you have any questions, please contact the customer service of the website.